Quick answer
Paint KNIGHT OF THE CROSS in four passes: prime neutral, block the cloth and shield, layer chainmail with a dark wash and light drybrush, then base for contrast. Keep the palette limited to two cloth colors plus metallic so the figure reads clearly at tabletop distance.
Why a limited palette works for this knight
Crusader knights carry a lot of visual information: chainmail, cloth, a shield or flag, and a helmet. If you paint every surface a different color, the model turns into noise at arm's length. A restrained scheme of one dark cloth, one off-white cloth, and two metals keeps the silhouette readable.
The trade-off is that limited palettes show brush mistakes more easily. Thin your paints and work in two coats rather than one thick layer. If you want more variety later, add a single accent color on the shield or trim rather than repainting the whole figure.
Prepare the model before any paint touches it
Wash the miniature in warm soapy water and let it dry completely. Mold release agent and skin oils prevent primer from bonding, and a patchy prime is the most common reason detail disappears under paint.
Mount the figure on a temporary handle with putty or tape. Handling the model directly during painting rubs off paint at the high points, especially on chainmail and the helmet.
Step-by-step painting process
- Prime in a neutral tone: Apply two thin coats of grey or light brown primer from 20–30 cm, rotating the model. Let each coat dry before the next. Common mistake: spraying too close and filling chainmail links with primer. Check the chainmail under a lamp before moving on; if links look soft, strip and re-prime rather than painting over.
- Block the cloth and flag: Paint the cloth areas with a dark base color and the flag with an off-white, using two thin coats. Leave the metallic areas unpainted for now. Common mistake: letting cloth paint spill onto chainmail, which is hard to correct later. Keep a clean, damp brush handy to lift stray paint immediately.
- Basecoat the chainmail: Cover all mail and helmet surfaces with a dark silver or gunmetal, working the paint into the links with a small brush. Common mistake: applying one heavy coat that obscures the link texture. Thin the metallic to a milk consistency; two passes preserve detail better than one.
- Wash and highlight the metal: Apply a black or dark brown wash over the chainmail and let it dry fully. Then drybrush a lighter silver across the raised links with a nearly dry brush. Common mistake: drybrushing while the wash is still wet, which smears it. Test the drybrush on your thumbnail first; it should leave only a faint trace.
- Shade and highlight the cloth: Wash the cloth with a darker version of its base color, then layer the original color back on the raised folds, leaving the wash in the recesses. Common mistake: washing the flag with the same dark wash as the cloth, which dulls it. Use a separate, lighter wash on the flag to keep it bright.
- Paint the details and face: Pick out the belt, scabbard, and any visible face or helmet trim with a fine brush. Keep the face simple: base skin, a thin wash, and one highlight on the nose and cheekbones. Common mistake: overworking the face until it looks muddy. Stop at three layers on the face; tabletop distance hides small imperfections.
- Base for contrast and seal: Texture the base with sand or grit, paint it a muted earth tone, and add a dry pigment or light drybrush. Then apply a matte varnish to the whole model. Common mistake: skipping varnish, which leaves metallic paint vulnerable to rubbing during play. Varnish in two thin coats rather than one heavy coat to avoid clouding.
Product facts
- KNIGHT OF THE CROSS: KNIGHT OF THE CROSS is a Knight Templar figure that displays the flag of his faith, described in the catalog as constantly fighting and reclaiming land for his king and God. The flag is a focal point, so plan its colors early and keep the rest of the figure quieter so the banner reads clearly.

KNIGHT OF THE CROSS


